EXPLOSION PROOF TRANSMITTER (Amplified) Series 425

$719.00

Barksdale’s Series 425 Transmitters are general purpose, industrial grade transducers, ideal for use in general industrial applications when a robust transducer is required. Wetted parts are constructed of 17-4PH and 300 Series Stainless Steel, with NEMA 4 enclosures constructed of 304 Stainless Steel. These units feature a stable, diffused silicon sensor that achieves .25% accuracy, have pressure ranges from 0-10,000 psi and are available in 5V, 10V or 4-20 mA outputs. High pressure snubbers are standard on units at 2,000 psi and above. Optional surge voltage protection to 6kV is available. A variety of process fittings and electrical connections are available to meet your needs.

PART NUMBER:

  • 425X-13
SKU: 425X-13 Category: Tags: , , ,

Description

General Specifications

Accuracy (LH & R): ±0.25% FSO (±0.5% for vacuum only [-23]) at 75°F (24°C), typical
Long Term Stability: ±0.5% FSO of calibration curve
Typical Life Cycle: 100 million cycles
Proof Pressure: 2 times rated pressure or 13,000 psi max. (884 bar), whichever is less
Input: Excitation voltage: 12 to 30 VDC
Supply Current: 16 mA maximum (no load)
Min. Load Resistance: 2K ohms (voltage series only)
Output: Output: 4 to 20 mA
Full scale output: 16 mA ± 1%
Zero output: 4 mA ± 2%
Span: 16mA
Wetted Parts: 17-4 PH (fitting) & 300 stainless steel (sensor)
Enclosure: NEMA 4, 300 series stainless steel
Pressure Connection: 1/4″-18 NPT male (STD)
Response Time: 2 kHz
Electrical Connection: 3 conductor for voltage series and 2 conductor for current series, 24 awg, PVC jacketed, shielded cable, 3 ft. (1 m) long with integral strain relief and case ground.
Temperature Ranges:

Operating:

Compensated:

Storage:

  

-40° to 185°F (-40° to 85°C )

30° to 160°F (-1° to 71°C)

-40° to 185°F (-40° to 85°C)
Temperature Shift:

Zero & Span:

  

± 0.0125% per °F over compensated range, 75°F reference
Vibration: 15 g´s, 10-2000 Hz, MIL-STD 202
Shock: 50 g´s, 11 ms, MIL-STD 202 Method 213, Cond. G.
Built-in Protection: Conducted & radiated RF emissions/ interference to EN 55011
IEC 801-2, -3, -4, -5, and -6
EN/IEC 6100-4-2, -3, -4, -5, -6
Refer to engineering drawing for details.
Weight: 7.4 oz. (210 grams) to 1000 psi
9.4 oz. (266 grams) 2,000 psi and higher
Warranty: 1 year warranty
 

 

Wiring Code

Milliamp – Series 425
A 1 Red + Excitation
B 2 Black – Excitation
D 4 Bare Case Drain

 

 

Explosion Proof Transmitter 425 series – Features / Applications

Explosion Proof Transmitter 425 series – Installation / Maintenance

Additional information

Weight 0.58 lbs

Reviews

There are no reviews yet.

Be the first to review “EXPLOSION PROOF TRANSMITTER (Amplified) Series 425”

Your email address will not be published. Required fields are marked *

Related products